What is the "Speed" of the DMX from the Entec USB/DMX device (Update rate, Break length, Mark after Break, inter byte idle time)... What is the DMX speed of the devices that do not work... It must be understood that some Strand Devices have trouble recieving DMX outside of very narrow parameters. In the past I have used the following DMX parameters to "Talk" to Strand DMX gear.
It is a obvious question but one that had to be asked.
Break = 160 uS Mark after break = 60uS inter-byte idle time = 0uS and try to keep the update rate to less that 32 per second.
Message Thread
« Back to index