
Posted by Grant Moseley One zone will be RAM, 24" spacing, .6 gph to be used on blueberries One zone will be Typhoon 20 mil, 24" spacing, .4 gph on raspberries. Another zone will be using T-tape 6 mil, 12" spacing, and .45 gpm. for various vegetable. My question is: Will it work to have a pressure regulator installed comming out of the filter so that all zone havee the same pressure, or does All of my runs are about 300' in length. Any help appreciated. Grant
![]()
on 12/14/2003, 5:11 pm
207.190.90.105
I am attempting to set up trickle for three different types of drip tape.
each tape require a different pressure? If the RAM could operate at the same pressure as the T-tape, could I use the same Toro header pipe for all zones rather that pvc pipe for the RAM on the blueberries.
Message Thread:
![]()
« Back to thread