Posted by Elie on February 20, 2004, 2:07 pm, in reply to "Re: Help: Newbie install problem: No video from RT2000 AGP on Comopaq AMD system " 1-The RT2000 PCI codec card which contains the Firewire input and the connector for the breakout Box 2-The AGP G400 Flex 3D card. 3-Ribbon cable 4-Break out box 5-RT2000 cable 6-Audio cable 7-Firewire cable If you are missing the first card, then for sure you have a major problem because without it, you will not be able to do anything. I would suggest you look at the Matrox web site for more information... http://www.matrox.com/video/support/rt2000/docs/home.cfm Hope this helps,
67.70.138.214
The RT2000 comes with the following configuration...
And download the installation document located at the bottom of the above page, this will help you identify what you should have for a complete RT2000 setup.
Elie
Message Thread:
« Back to thread