Cars and Parts For Sale: Re: Assorted all makes Parts

[ Post a Response | Cars and Parts For Sale ]

Re: Assorted all makes Parts

Posted by Chris on 6/6/2006, 8:25 pm, in reply to "Assorted all makes Parts"
69.227.65.140

Im interested in 260 Ford parts, let me know what you have.
--Previous Message--
: Assorted Parts for Sale:
:
: 428 4 bolt block: Factory style caps.
: Bored/Honed .030. 4.151 bore. ARP main
: studs. Line honed. Block filled. Ready to
: go.... $1,000
:
: 4.250 Stroke Hard Chromed "N" 455
: Crank: Fresh 455 std. main size w/BBC std
: rod size....$750.00
:
: 428 Crank: turned to std 400 mains, std BBC
: rod journal, 25 passes, polished, deburred,
: ready to go.... $700.00
:
: 2 - 455 Cranks: turned to 400 mains, std BBC
: rod journal, ready to go.... (each) $375.00
:
: Valve Springs: 1.540/1.00 O.D/.I.D. Used
: good, Single Spring w/crane 11/32 7 degree
: type retainers, 120 lbs @1.900.... $90.00
:
: Valve Springs: 1.640/.769 O.D/I.D. Used
: good, Dual springs. 210 lbs@1.900....$80.00
:
: 20 - sets (new) of 67 & up Pontiac
: intake gaskets. (Mr.Gasket type).... $6.00
: pr.
:
: Used 455 Pontiac TRW L2594F STD. These are
: 11-1 with 107cc H.O. heads and .039
: gaskets.... $200.00 one set. w/new moly
: rings. Skirts knurled.
:
: 8 -NEW 301 Pontiac Flat top .060 pistons…
: (sell for cost)....$90.00
:
: Good Pontiac stock rods (cleaned and checked
: for size) about 500 of these.... (each)
: $10.00
:
: Complete set of Pontiac factory BOLTS:
: These are the bolts only for 428/455 4 bolt
: main caps.... $20.00 set
:
: 1967 Pontiac front block timing assembly;
: Cover, 2 W.P plates, balancer, pulley set up
: w/aftermarket A/C grooved pulleys. Excellent
: condition. All cleaned and painted for
: only.... $300.00
:
: 7K3 Heads; Freshen, Ready to bolt on. New
: Bronze guides, Stock factory valves, Comp
: valve job, New Crane .512 lift springs.
: Fresh Resurfaced on 3 sides. Boot seals,
: Brass freeze plugs, new keepers, etc,
: etc.... $650.00
:
: #301 Pontiac Turbo Heads: Complete and ready
: to bolt on. Valve job, resurfaced with new
: keepers. Guides replaced as needed. Boot
: seals w/o-rings. Fresh. (Date code F/ 16/
: 9).... $300.00
:
: #6H 455 Pontiac heads: Complete used
: cores.... $40.00 a pair.
:
: #7H1 350 Pontiac heads: Complete used
: cores.... $40.00 a pair
:
: 1969 thru 1972 Factory cast intakes;
: Cleaned, call/e-mail for year &
: numbers..... $75.00
:
: 1975-79 Pontiac Factory Q-Jet 4bbl intakes
: (tanked).... $20.00
:
: T-400 Pontiac BOP type tranny cores:
: Codes listed below.
: 8 or S-PB65
: PW-69
: P2B-73
: 71-BC
: 73-P2R
: 73-P2X
: 73-PC
: 74-PC
: 76-PX
: 80-BB
:
: 66 GTO Stuff: 2 65/66 GTO Tempest; front
: upper control arms.... $35.00
: 2 rear shocks Cheap.... $5.00
: I also have the 2 front spindles, backing
: plates with brakes (1 drum is wore out), but
: noticed that they were each were different
: when I pulled them from my old 66 GTO and
: takes a different brg and seal. (I installed
: disc brakes).... $45.00
: Also have 1966 Tempest/GTO assorted chrome
: (brushed aluminum?) outside pieces, frt
: & rear window moldings, etc, all won t
: separate.... $60.00
:
: 1970-81 Rear Firebird spoilers (3 pc) (these
: are the later 79 style spoilers) All need
: refinished. 2 set left.... $40.00 set
:
: 403 Olds block w/rods/pistons and turned
: .010/.010 crank (needs bored).... $175.00
:
: ONE only 403 Olds heads (rebuilt 4A
: casting): valve job, resurfaced, new keepers
: & seals.... $125.00
:
: All 57-64 Olds rear stuff: Complete stock
: rear with welded spiders and 5:57
: gears.....$250.00
: Summers Brothers axles, 23". Both axles
: are the same length. 23” from outside of
: bearing to axle end. 25 ľ” from outside
: flange to axle end. 31 spline, 4 3/4"
: bolt pattern. 3.150 outside bearing
: diameter. $200.00 pr.
:
: N.O.S. flare jets: Both NOS & NX.
: Have tons more different size jets. $3.00
: each.
: Plus massive assorted New Spare Nitrous
: stuff. E-mail or call.
:
: Electric fan and shroud for VW style racing
: radiator, went to a different style. Works
: great.... $30.00
:
: 5 used T-400 yokes (each).... $40.00
:
: One ‘NEW’ Safety hub kit (one side) for ‘12
: bolt’ GM style Chassis Eng. Axle or Strange
: axle. broke an axle but had to buy the whole
: kit... $30.00
:
: 11" Chrome Air cleaner top (NEW) K
: & N (I used just the base and
: filter).... $15.00
:
: 454 B.B.C. Complete Engine: Rebuilt, std
: bore with new hyp coated pistons, .010/.010
: crank, resized rods, new balancer &
: flywheel, 218@.050 cam. early Closed Chamber
: heads w/hardened seats, aluminum intake,
: chrome covers, 3/8" pushrods, long slot
: rockers, Fresh ready to run……...$3,000 Call
: for more info
:
: 25' NEW Aluminum 5/8" Gas line: Moroso
: part #65345.... $20.00
:
: S.B.C. Double Hump Heads: Comes with
: 2.02/1.60 S.S. Valves. Angle milled to 52
: cc's. Intake side angle cut to match.
: Machined for screw-in studs & Guide
: plates. Cut for big springs. 3 angle valve
: job. No port work. All the work is done,
: just add the following. springs, retainers,
: keepers, studs and guide plates.... 'FRESH'
: .... $550.00 includes S.S. valves.
:
: Assorted early BBC oval port heads
: cores........... e-mail for availability
: & price.
:
: Crankshafts: Ready to go, fresh but been
: sitting: SBC 327 small journal:
: .010-.010.... $200.00
: 454 BBC Steel crank: .010-.030.... $300.00
: 351W Ford: 1 piece rear main; .020-.010....
: $175.00
: 429 Ford cranks: #4UA & #4U
: .010-.010.... $200.00 I Have 2.
: 460 Ford: .010-.010.... $200.00
:
: 6 sets of early 63-69 260 & 289 Ford
: heads for sale. Cores only: e-mail for
: availability…$20.00 each
:
: Moroso Cable Drive Tach, w/ Chrome mounting
: plate & drive cable..... $125.00
:
: