Posted by Mike on March 30, 2004, 6:16 pm, in reply to "Re: I meant to say Pro 95 (not 43)"
64.136.196.147
Press Prog to go into programming mode. Go to the first channel in the bank you want to program the system into. Either do it directly (for example, enter 200, press program for bank 2), use the up/down keys, or use Func then up/down to move one bank at a time. Press Trunk to enter the trunk programming mode. Press Mode until "MOT" is displayed as the mode, then press Prog to get back into the programming mode. Enter the first frequency in the list, followed by E. Press either Prog or Up to go to the next channel, then enter the next frequency. Make sure that after you have entered a frequency that "MO" appears in the upper right corner, otherwise it isn't being flagged as part of the trunking system. Once all of the frequencies are entered, press Scan and make sure the bank is turned on. That's it!
Message Thread:
« Back to thread