question
Posted by RayJ1701 on 4/15/2018, 5:00 pm
I've been working on one of these off and on for a while. about 6 months ago I bought a completed unit that was disassembled. Got it in, it needed a new main shaft to replece a bent one and now I am putting everything back together. It shows evidence of shooting many rounds but when I turn the crank with bolts installed, drag from the firing pins becomes too much and I worry about twisting the main shaft at the drive gear. Everything is smooth with the "safety" engaged. I've already greased and oild more than i thought would be necessary. Any ideas or feedback will be appreciated! thank you Ray
|