[ Post a Response | GatChat, Gatling Gun Discussion Forum ]
Posted by Paul Moore/RG-G INC
on 3/18/2007, 1:38 pm, in reply to "changes to drawings"
209.169.41.54
Good Question. It's so long ago I'd forgotten. The important dimension is the 1.250 on the front end. If The rear (right hand side of the drawing) is a little shorter, that should make no difference. The change came about as some .22 long rifle ammo either grew or there were some I didn't measure. The real important part is that I was forced to increase the "throw" or travel on the box cam, 48-08 by ,050" so it needs to be 1.175, so I just added the difference to the rear of the carrier block. There are some changes to the bolt details 48-20 that are important. Vinnie has the latest set of drawings and I strongly suggest the stick magazine as it's easier to build and much more reliable. Most other changes involve the addition of gun sights,the oscillator and carriage.
Message Thread:
« Back to thread