Posted by MarkR on 5/7/2007, 2:01 pm, in reply to "Power Steering Repair - Tips Requested" Ensure you have the correct fluid as our PS racks do not take conventional PS fluid: ATF fluid is the ticket, but do a search to confirm. The line is simply a remove/replace, keeping dirt out of the system/sealing surfaces along the way. good luck.
65.70.214.134
I've done it: ensure you have the correct wrenches: 19mm I believe, & a catchcan for the fluid run-off. There are crush washers on each sides of all Banjo bolts: be aware of these on both removal & replacement. I also recommend driving to a car-wash & pressure-washing away all dirt/fluid from the appropriate areas as you cannot allow any dirt to get on any of the sealing surfaces: each side of both crush washers, bolts, etc: must be as clean as you can wipe them with a clean paper towel.
Message Thread:
« Back to thread